Frequently Asked Questions

It is an important issue that any product is delivered to the consumer without any damage after the production stage. You can overcome this problem by choosing “EPS Packaging” that can be designed specifically for the product, resistant to pressure and elastic, and whose volume and dimensions do not change. EPS packaging protects the products from all kinds of dangers during transportation. It protects the product against pressure, bumps, falls and jolts by absorbing impacts. Besides, it is very light. These properties make it an ideal packaging material and are widely used in durable consumer goods, small household appliances, and electronics and plumbing products.

By using EPS packaging, protect your products against both heat and cold thanks to the superior insulation of EPS. In order for some products not to deteriorate their properties until they reach the customer, their temperature must be preserved. EPS material provides a very good insulation. In this way, the product is protected from external weather effects. In addition, it is water and water vapor proof. It is suitable for food regulations and does not have a negative effect on the smell and taste of the product. It is opaque, so it can be used in the packaging of photosensitive materials. With these features, it is used in the agricultural sector (fruit, vegetable crates), food industry (ice cream, meat products, frozen food) and dairy products.

Protecting buildings from cold in winter and heat in summer is only possible with effective thermal insulation. EPS foam is one of the best materials to achieve this. In applications with EPS foam insulation boards, less heating in winter and less cooling in summer reduces the amount of energy consumed. Thanks to energy savings, energy costs such as natural gas, coal and electricity are significantly reduced. EPS plates carry air trapped in their small pores. This trapped air also provides excellent thermal insulation.

EPS is a material that does not disappear over time. It is normal that the plates do not give the expected performance if the correct thickness and density are not selected according to where they are used. EPS material is a material that does not disappear over time, does not change in volume and size and does not dissolve in nature. Recycling is also provided by special methods. For this reason, the belief that EPS disappears over time is wrong. The cases where this is claimed are due to the fact that the material of low quality, low density (density <10kg / m3) was used less than the required thickness. EPS boards laid on the horizontal roof of a water distribution depot and pump room in 1955 were opened by a reporter and an expert in 31.12.1969, that is, 15 years later, and the following lines were included in the report: “As a result of the examination of the roof cover, It has been observed that EPS rigid foam boards did not change in any way despite being under the influence of intense heat without the protection of the roof top cover made of bitumen. The plates are still abutting and show no signs of aging such as fading, shifting, or cracking.”